无论喷涂还是机械加工，Coatmaster都能快速精确测量涂层厚度。

　　在热喷涂涂层时，涂层厚度不合格会导致出现瑕疵品和遭到客户投诉。例如，曲轴箱的铁涂层就是这种情况。但目前仍不能在喷涂工艺后直接测量其涂层厚度。喷涂工序与使用显微镜测量涂层厚度的相隔了几天。用传统仪器不能在过程中控制涂层厚度。

　　使用Winterthur公司的Coatmaster测厚系统后，可立即测量并确定涂层厚度。

　　客户评价：

　　Oerlikon Metco公司的SUMEBore高层 Dr. Peter Ernst说道：“在不破坏涂层的情况下，使用Coatmaster可以直接对热喷涂涂层进行精确、快速的涂层厚度测量。能够快速检测和校正影响涂层厚度的工艺偏差。”

　　Measure quickly and accurately, whether sprayed or machined.

　　Insufficient coating thickness when applying thermally sprayed coatings leads to rejects and customer complaints. This can be the case, for example, with iron coatings in crankcases. Until now, however, it has not been possible to check the coating thickness directly after application. Several days pass between the application of the coating and the determination of the coating thickness with a microscope. With conventional methods, it was previously impossible to control the layer thickness during the process.

　　With the coatmaster from Winterthur, the coating thickness can be determined immediately after application.

　　What our customers say:

　　With coatmaster, it is possible to carry out an exact and fast layer thickness measurement of the thermally sprayed coating directly in the process without destruction. Process deviations affecting the thickness of the coating can be quickly detected and corrected.» Dr. Peter Ernst, Head of SUMEBore, Oerlikon Metco.